可重构制造系统重组过程中设备选择模型的研究

根据生产任务选择加工设备进行制造资源重组是实现可重构制造系统的关键问题之一，由于设备的选择涉及到多种因素，既有定量指标，又有定性指标，传统的依靠人工经验的方法显得力不从心。本文首先结合实际情况，提出了一套设备选择评价体系，通过对模糊判断矩阵采用最小对数二乘法确定各评价因素的权重系数，针对定性指标和定量指标采用不同的方法确定其性能指标值，通过模糊积分对评判指标进行综合评判，最后进行了实例研究。所提出的方法有效地简化了决策过程，为可重构制造系统设备选择提供了一套行之有效的方法。     

Robust Speed Control of a Low Damped Electromechanical System Based on CRONE Control: Application to a Four Mass Experimental Test Bench

Robust speed control of a low damped electromechanical system with backlash is studied, controlled load angular speed being not measured. The proposed control strategy combines a Luenberger observer (load angular speed and load torque disturbance estimations) and a robust CRONE controller. The observer provides estimation of the load angular speed and of the disturbance torque applied on the load. Through the computation of only three independent parameters (as many as a PID controller), the CRONE controller permits to ensure the robust speed control of the load in spite of plant parametric variations and speed observation errors. The proposed control strategy is applied to a four mass experimental test bench.     

光刻机投影物镜的像差原位检测新技术

提出了一种新的光刻机投影物镜像差原位检测(AMF)技术。详细分析了该技术利用特殊测试标记检测投影物镜球差、像散、彗差的基本原理,论述了该技术利用对准位置坐标计算像差引起的成像位置偏移量的方法。实验结果表明AMF技术可实现球差、彗差、像散等像差参量的精确测量。AMF技术考虑了光刻胶等工艺因素对像差引起的成像位置偏移量的影响,有效避免了目前基于硅片曝光方式的彗差原位检测技术对离焦量、像面倾斜等像质参量限制的依赖。     

The application of the measurement uncertainty concept to in-process control in pharmaceutical development

 Any analytical data is used to provide information about a sample. The "possible error" of the measurement can be of extreme importance in order to have complete information. The measurement uncertainty concept is a way to achieve quantitative information about this "possible error" using an estimation procedure. On the basis of the analytical result, the chemist makes a decision on the next step of the development process. If the uncertainty is unknown, the information is not complete; therefore this decision might be impossible. The major problem for the in-process control (IPC) procedure is that not only the repeatability but also the intermediate precision (which expresses the variations within laboratories related to different days, different analysts, different equipment, etc.) has to be good enough to make a decision. Unfortunately, the statistical information achieved from one single analytical run only gives information about the repeatability. This paper shows that the estimation of the measurement uncertainty for IPC is a way to solve the problem and gives the necessary information about the quality of the procedure. An example demonstrates that an estimate of uncertainty based on the standard deviations of an analytical method gives a value similar to one based on the standard deviations obtained from a control chart. Therefore, the estimation is both a very useful and also a very cost-effective tool. Though measurement uncertainty cannot replace validation in general, it is a viable alternative to validation for all methods that will never be used routinely. Received: 24 May 1996 Accepted: 10 August 1996     

Push–Pull Porphyrins via β-Pyrrole Functionalization: Evidence of Excited State Events Leading to High-Potential Charge-Separated States

A new set of free-base and zinc(II)-metallated, β-pyrrole-functionalized unsymmetrical push–pull porphyrins were designed and synthesized via β-mono- and dibrominated tetraphenylporphyrins using Sonogashira cross-coupling reactions. The ability of donors and acceptors on the push–pull porphyrins to produce high-potential charge separated states was investigated. The porphyrins were functionalized at the opposite β,β′-pyrrole positions of porphyrin ring bearing triphenylamine push groups and naphthalimide pull groups. Systematic studies involving optical absorption, steady-state and time-resolved emission revealed existence of intramolecular type interactions both in the ground and excited states. The push–pull nature of the molecular systems was supported by frontier orbitals generated on optimized structures, wherein delocalization of HOMO over the push group and LUMO over the pull group connecting the porphyrin π-system was witnessed. Electrochemical studies were performed to visualize the effect of push and pull groups on the overall redox potentials of the porphyrins. Spectroelectrochemical studies combined with frontier orbitals helped in characterizing the one-electron oxidized and reduced porphyrins. Finally, by performing transient absorption studies in polar benzonitrile, the ability of push–pull porphyrins to produce charge-separated states upon photoexcitation was confirmed and the measured rates were in the range of 10⁹ s⁻¹. The lifetime of the final charge separated state was around 5 ns. This study ascertains the importance of push–pull porphyrins in solar energy conversion and diverse optoelectronic applications, for which high-potential charge-separated states are warranted.     

薄壁件加工系统动态响应分析

薄壁件在铣削加工中容易产生共振或变形，直接影响加工稳定性及加工精度。采用主轴-刀具-工件整体铣削系统连续梁模型，系统研究在动态铣削力作用下，刀具端部与工件端部的动态响应之间的相互影响关系以及对整体系统动态响应影响较大的薄壁件尺寸。结果表明，工件横截面高度对系统共振的影响较为明显，当高度尺寸较小时，工件的低频共振会通过动态铣削力直接反映到刀具端部的振动频响上。工件横截面底边宽度尺寸的增大虽然对共振频率的改变不太明显，但会导致激发出来的刀具共振幅度出现明显降低。研究成果可以为薄壁件铣削加工系统的稳定性控制提供理论基础。     

Evaluation of bias voltage effect on diamond‐like carbon coating properties deposited on tungsten carbide cobalt

Diamond‐like carbon (DLC) coatings are getting new trends for cutting tool applications. In this research work, the DLC coatings were deposited on 15 × 15 × 5‐mm tungsten carbide cobalt substrates with variation of bias voltage from 0 to 500 V. The DLC films of 400 nm were deposited using filter cathode vacuum arc system, and 100‐nm chromium interlayer was deposited by sputtering. The optimized conditions for plasma pretreatment at different argon flow rates and deposition rates with bias variation were found. The effect of bias voltage on microstructure, tribology, adhesion, and mechanical properties were evaluated. The characterization techniques employed were field emission electron microscopy, Raman spectroscopy, wear test, SEM, scratch test, and nano‐indentation. The effect of substrate pretreatment on film adhesion was also evaluated. It was observed that etching rate increased with the increase in Ar flow rate while DLC deposition and sputtering rates decreased with increase in the bias voltage. The characterization suggests the DLC coatings deposited at 0 V bias as optimum condition because of showing the best results among all other conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

利用三维虚拟技术突破物质结构教学*——从演示型工具到探索型工具的转变

针对物质结构教学的抽象性,开发了一套基于三维虚拟技术的物质结构教学软件,可对结构模型进行旋转、平移、缩放、切割、镜像、插入或删除原子(团)及启停预先设置的动画等操作,强大的交互功能不仅能对分子或晶体结构如构造异构、立体异构、晶体的堆积方式、晶胞的划分、配位数、晶体结构中的空隙及空间利用率等问题进行效果极佳的可视化教学,另一方面,通过对B₁₂与C₆₀分子空间构型转变的探究揭示数学构型的重要性,通过对六方晶胞占有原子个数的探究修正晶胞模型,通过对金属晶体的4种基本堆积方式成因的探究提出“半密置层”概念来完善紧密堆积规律等案例,展示出三维虚拟技术在微观结构探索发现方面的巨大潜力。     

浙江新高考化学加试题难度研究*

在对已有试题难度量化工具进行改进的基础上,建构了化学加试题难度评估工具。对2015年至2019年国家新高考实验区浙江省的8次化学选考加试题的难度进行了量化评价。结果表明,8次化学加试题整卷难度变化较大,但同一学年、有相同学生可能参与的2次化学选考的整体难度相近;加试题能力特征和难度差异明显,“有机化学基础”加试题(第32题)难度相对稳定,而第30题(化学反应原理)与第31题(实验化学)加试题难度却表现出一定的波动性。在对8次化学加试题的难度及相关因素进行分析的基础之上,也对如何提高加试题的编制质量,提出了可行性建议。     

Chatter mitigation using the nonlinear tuned vibration absorber

A passive vibration absorber, termed the nonlinear tuned vibration absorber (NLTVA), is designed for the suppression of chatter vibrations. Unlike most passive vibration absorbers proposed in the literature for suppressing machine tool vibrations, the NLTVA comprises both a linear and a nonlinear restoring force. Its linear characteristics are tuned in order to optimize the stability properties of the machining operation, while its nonlinear properties are chosen in order to control the bifurcation behavior of the system and guarantee robustness of stable operation. In this study, the NLTVA is applied to turning machining.